§ 173.65 Divinylbenzene copolymer.
Divinylbenzene copolymer may be used for the removal of organic substances from aqueous foods under the following prescribed conditions:
（a） The copolymer is prepared in appropriate physical form and is derived by the polymerization of a grade of pinylbenzene which comprises at least 79 weight-percent pinylbenzene, 15 to 20 weight-percent ethylvinylbenzene, and no more than 4 weight-percent nonpolymerizable impurities.
（b） In accordance with the manufacturer's directions, the copolymer described in paragraph （a） of this section is subjected to pre-use extraction with a water soluble alcohol until the level of pinylbenzene in the extract is less than 50 parts per billion as determined by a method titled, “The Determination of Divinylbenzene in Alcohol Extracts of Amberlite XAD–4,” which is incorporated by reference. Copies of this method are available from the Center for Food Safety and Applied Nutrition （HFS–200）, Food and Drug Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, or available for inspection at the National Archives and Records Administration （NARA）. For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. The copolymer is then treated with water according to the manufacturer's recommendation to remove the extraction solvent to guarantee a food-grade purity of the resin at the time of use, in accordance with current good manufacturing practice.
（c） The temperature of the aqueous food stream contacting the polymer is maintained at 79.4 °C （175 °F） or less.
（d） The copolymer may be used in contact with food only of Types I, II, and VI-B （excluding carbonated beverages） described in table 1 of paragraph （c） of §176.170 of this chapter.
[50 FR 61, Jan. 2, 1985]
更多关于美国 FDA 可直接加入食品中的辅助性食品添加剂的种类法规，请点击美国FDA 21 CFR 第173部分可直接加入食品中的辅助性食品添加剂种类汇总
更多国外法规翻译，请联系食品翻译中心
编辑：foodfagui
