Canada Occupational Health and Safety Regulations
1.1 - PART I
1.2 - Interpretation
1.3 - Prescription
1.4 - Application
1.5 - Records and Reports
1.6 - Inconsistent Provisions
1.8 - Alternate Media
2.1 - PART II PERMANENT STRUCTURES
2.1 - Interpretation
2.2 - DIVISION I BUILDINGS
2.2 - Standards
2.3 - Doors
2.4 - Clearances
2.5 - Floor and Wall Openings
2.6 - Open-top Bins, Hoppers, Vats and Pits
2.7 - Ladders, Stairways and Ramps
2.11 - Docks, Ramps and Dock Plates
2.12 - Guardrails
2.13 - Toe Boards
2.14 - Housekeeping and Maintenance
2.17 - Temporary Heating
2.18 - DIVISION II TOWERS, ANTENNAS AND ANTENNA-SUPPORTING STRUCTURES
2.20 - DIVISION III HVAC SYSTEMS
2.20 - Application
2.21 - Standards
2.23 - Records
2.24 - Operation, Inspection, Testing, Cleaning and Maintenance
2.27 - Investigations
3.1 - PART III TEMPORARY STRUCTURES AND EXCAVATIONS
3.1 - Application
3.2 - General
3.7 - Barricades
3.8 - Guardrails and Toe Boards
3.9 - Temporary Stairs, Ramps and Platforms
3.10 - Scaffolds
3.11 - Portable Ladders
3.12 - Excavation
3.13 - Safety Nets
3.14 - Housekeeping
4.1 - PART IV ELEVATING DEVICES
4.1 - Application
4.2 - Standards
4.3 - Use and Operation
4.5 - Inspection and Testing
4.7 - Repair and Maintenance
5.1 - PART V BOILERS AND PRESSURE VESSELS
5.1 - Interpretation
5.2 - Application
5.3 - Fabrication and Installation Standards
5.5 - Use, Operation, Repair, Alteration and Maintenance
5.10 - Inspections
5.16 - Buried Pressure Vessels
5.17 - Records and Reports
6.1 - PART VI LIGHTING
6.1 - Interpretation
6.2 - Application
6.3 - Measurement of Average Levels of Lighting
6.4 - Lighting — Office Areas
6.5 - Lighting — Industrial Areas
6.6 - Lighting — General Areas
6.7 - Lighting — VDT
6.8 - Lighting — Aerodrome Aprons and Aircraft Stands
6.9 - Lighting — Artefactual Exhibits and Archival Materials
6.10 - Emergency Lighting
6.11 - Minimum Levels of Lighting
SCHEDULE I - LEVELS OF LIGHTING IN OFFICE AREAS
SCHEDULE II - LEVELS OF LIGHTING IN INDUSTRIAL AREAS
SCHEDULE III - LEVELS OF LIGHTING — GENERAL AREAS
7.1 - SCHEDULE IV - LEVELS OF LIGHTING — VDT WORK
7.1 - PART VII LEVELS OF SOUND
7.1 - Interpretation
7.2 - Measurement and Calculation of Exposure
7.3 - Hazard Investigation
7.4 - Limits of Exposure
7.5 - Reduction of Sound Exposure
7.6 - Report to Regional Health and Safety Officer
7.7 - Hearing Protection
7.8 - Warning Signs
SCHEDULE - MAXIMUM DURATION OF EXPOSURE TO A-WEIGHTED SOUND PRESSURE LEVELS IN THE WORK PLACE
8.1 - SCHEDULE II
8.1 - PART VIII ELECTRICAL SAFETY
8.1 - Interpretation
8.2 - Application
8.3 - Standards
8.4 - Safety Procedures
8.8 - Safety Watcher
8.9 - Coordination of Work
8.10 - Poles and Elevated Structures
8.12 - Isolation of Electrical Equipment
8.14 - Guarantees of Isolation for Electrical Equipment
8.17 - Live Test
8.18 - Termination of Guarantee of Isolation
8.19 - Safety Grounding
8.23 - Switches and Control Devices
SCHEDULE - DISTANCES FROM LIVE ELECTRICAL PARTS
9.1 - PART IX SANITATION
9.1 - Interpretation
9.2 - General
9.12 - Toilet Rooms
9.18 - Wash Basins
9.23 - Showers and Shower Rooms
9.24 - Potable Water
9.30 - Field Accommodation
9.34 - Preparation, Handling, Storage and Serving of Food
9.39 - Food Waste and Garbage
9.40 - Lunch Rooms
9.41 - Ventilation
9.43 - Clothing Storage
10.1 - SCHEDULE - MINIMUM VENTILATION REQUIREMENTS FOR CHANGE ROOMS, TOILET ROOMS AND SHOWER ROOMS
10.1 - PART X HAZARDOUS SUBSTANCES
10.1 - Interpretation
10.2 - Application
10.3 - DIVISION I GENERAL
10.3 - Records of Hazardous Substances
10.4 - Hazard Investigation
10.7 - Medical Examinations
10.8 - Storage, Handling and Use
10.13 - Warning of Hazardous Substances
10.14 - Employee Education
10.16 - Substitution of Substances
10.17 - Ventilation
10.19 - Control of Hazards
10.23 - Warnings
10.24 - Assembly of Pipes
10.25 - Explosives
10.26 - Ionizing and Non-ionizing Radiation
SCHEDULE - DEVICES TO BE REPORTED TO THE BUREAU OF RADIATION AND MEDICAL DEVICES
10.27 - DIVISION II HAZARDOUS SUBSTANCES OTHER THAN CONTROLLED PRODUCTS
10.27 - Identification
10.29 - DIVISION III CONTROLLED PRODUCTS
10.29 - Interpretation
10.30 - Application
10.31 - Material Safety Data Sheets and Labels in respect of Certain Controlled Products
10.32 - Supplier Material Safety Data Sheets
10.33 - Work Place Material Safety Data Sheets
10.34 - Availability of Material Safety Data Sheets
10.35 - Labels
10.37 - Portable Containers
10.38 - Special Cases
10.39 - Laboratories
10.40 - Signs
10.41 - Replacing Labels
10.42 - Exemptions from Disclosure
10.43 - Hazardous Waste
10.44 - Information Required in a Medical Emergency
10.45 - Fire and Explosion Prevention
11.1 - PART XI CONFINED SPACES
11.1 - Interpretation
11.2 - Hazard Assessment
11.3 - Entry Procedures
11.4 - Confined Space Entry
11.5 - Emergency Procedures and Equipment
11.6 - Record of Emergency Procedures and Equipment
11.7 - Provision and Use of Equipment
11.8 - Precaution
11.9 - Hot Work
11.10 - Ventilation Equipment
11.11 - Training
11.12 - Record Keeping
12.1 - PART XII SAFETY MATERIALS, EQUIPMENT, DEVICES AND CLOTHING
12.1 - General
12.4 - Protective Headwear
12.5 - Protective Footwear
12.6 - Eye and Face Protection
12.7 - Respiratory Protection
12.9 - Skin Protection
12.10 - Fall-Protection Systems
12.11 - Protection Against Drowning
12.12 - Loose Clothing
12.13 - Protection Against Moving Vehicles
12.14 - Records
12.15 - Instructions and Training
12.16 - Defective Protection Equipment
13.1 - PART XIII TOOLS AND MACHINERY
13.1 - Interpretation
13.2 - Design, Construction, Operation and Use of Tools
13.9 - Defective Tools and Machines
13.11 - Instructions and Training
13.13 - General Requirements for Machine Guards
13.14 - Use, Operation, Repair and Maintenance of Machine Guards
13.18 - Abrasive Wheels
13.20 - Mechanical Power Transmission Apparatus
13.21 - Woodworking Machinery
13.22 - Punch Presses
14.1 - PART XIV MATERIALS HANDLING
14.1 - Interpretation
14.2 - Application
14.3 - DIVISION I DESIGN AND CONSTRUCTION
14.3 - General
14.4 - Protection from Falling Objects
14.6 - Protection from Overturning
14.7 - Seat-Belts
14.8 - Fuel Tanks
14.9 - Protection from Elements
14.10 - Vibration
14.11 - Controls
14.12 - Fire Extinguishers
14.13 - Means of Entering and Exiting
14.14 - Lighting
14.15 - Control Systems
14.16 - Warning Devices
14.17 - Rear View Mirrors
14.18 - Guided Industrial Vehicles
14.19 - Conveyors
14.20 - DIVISION II MAINTENANCE, USE AND OPERATION
14.20 - Inspection, Testing and Maintenance
14.21 - Mobile Cranes
14.22 - Split Rim Wheels
14.23 - Instruction and Training
14.24 - Qualifications
14.25 - Signals
14.28 - Gradients
14.29 - Repairs
14.30 - Transporting and Positioning Employees
14.31 - Loading, Unloading and Maintenance While in Motion
14.34 - Positioning the Load
14.35 - Tools
14.36 - Housekeeping
14.37 - Parking
14.38 - Materials Handling Area
14.39 - Hazard Areas
14.40 - Rear Dumping
14.41 - Fuelling
14.42 - Ropes, Slings and Chains
14.43 - Safe Working Loads
14.44 - Aisles and Corridors
14.45 - Clearances
14.46 - DIVISION III MANUAL HANDLING OF MATERIALS
14.50 - DIVISION IV STORAGE OF MATERIALS
14.51 - DIVISION V TRANSITIONAL PROVISIONS
15.1 - PART XV HAZARDOUS OCCURRENCE INVESTIGATION, RECORDING AND REPORTING
15.1 - Interpretation
15.2 - Application
15.3 - Reports by Employee
15.4 - Investigations
15.5 - Telephone or Telex Reports
15.6 - Records
15.7 - Minor Injury Records
15.8 - Written Reports
15.10 - Annual Report
15.11 - Retention of Reports and Records
SCHEDULE I
16.1 - SCHEDULE II
16.1 - PART XVI FIRST AID
16.1 - Interpretation
16.2 - General
16.3 - First Aid Attendants
16.5 - First Aid Stations
16.6 - Communication of Information
16.7 - First Aid Supplies and Equipment
16.9 - First Aid Rooms
16.11 - Transportation
16.12 - Teaching First Aid
16.13 - Records
SCHEDULE I - REQUIREMENTS FOR FIRST AID KITS
SCHEDULE II - CONTENT OF FIRST AID KITS
SCHEDULE III - ADDITIONAL FIRST AID SUPPLIES AND EQUIPMENT FOR REMOTE WORKPLACES
SCHEDULE IV - FIRST AID ROOM SUPPLIES AND EQUIPMENT
17.1 - SCHEDULE V
17.1 - PART XVII SAFE OCCUPANCY OF THE WORK PLACE
17.1 - Interpretation
17.2 - Application
17.3 - Fire Protection Equipment
17.4 - Emergency Evacuation Plan
17.5 - Emergency Procedures
17.6 - Instructions and Training
17.7 - Emergency Wardens
17.9 - Inspections
17.10 - Meetings of Emergency Wardens and Drills
17.11 - Fire Hazard Areas
18.1 - PART XVIII DIVING OPERATIONS
18.1 - Definitions
18.2 - Application
18.4 - DIVISION I TYPE 1 DIVES AND TYPE 2 DIVES
18.4 - Written Procedures
18.5 - Instruction and Training
18.7 - Medical Evaluations
18.8 - Fitness to Dive
18.9 - Dive Plan
18.10 - Dive Team
18.15 - Emergency Assistance
18.16 - Pressure-related Injury
18.17 - Decompression
18.18 - Identification of Dive Site
18.19 - Supervision
18.21 - Hazards
18.22 - Communications
18.23 - Breathing Supply
18.26 - Diving Equipment
18.34 - Termination of Dive
18.35 - Observation After Diving
18.36 - Flying After Diving
18.37 - Reports and Records
18.43 - DIVISION II TYPE 2 DIVES
18.43 - Approach to Water Control and Intake Facilities
18.47 - Diving Hazards
18.49 - Use of Explosives
18.50 - Hyperbaric Chambers
18.52 - Alternative Energy Sources
18.53 - Surface Supply Type 2 Dives
18.63 - Type 2 Scuba Diving
SCHEDULE I - DIVER’S FLAG
19.1 - SCHEDULE II - INTERNATIONAL CODE FLAG A
19.1 - PART XIX HAZARD PREVENTION PROGRAM
19.1 - Hazard Prevention Program
19.2 - Implementation Plan
19.3 - Hazard Identification and Assessment Methodology
19.4 - Hazard Identification and Assessment
19.5 - Preventive Measures
19.6 - Employee Education
19.7 - Program Evaluation
19.8 - Reports
20.1 - PART XX VIOLENCE PREVENTION IN THE WORK PLACE
20.1 - Interpretation
20.3 - Work Place Violence Prevention Policy
20.4 - Identification of Factors that Contribute to Work Place Violence
20.5 - Assessment
20.6 - Controls
20.7 - Work Place Violence Prevention Measures Review
20.8 - Procedures in Response to Work Place Violence
20.9 - Notification and Investigation
20.10 - Training
具体内容请详见
加拿大职业健康和安全条例.pdf
更多国外法规翻译，请联系食品翻译中心
编辑：foodfagui
